Plasti-Bond® Heavy Duty
SELLEYS PLASTI-BOND is a multi-purpose plastic putty that can be used for building or repair work where filling, bonding or moulding is necessary. It sets in 20 minutes without shrinkage, after the hardener is mixed in.
|
|
Uses
Listed below are some of the 1001 ways SELLEYS PLASTI-BOND can be used: SELLEYS PLASTI-BOND can be used to fill holes, cracks and splits in a variety of surfaces including metal, timber, brick, fibre cement, fibreglass, concrete, plaster, many plastics, alloys, tiles, ceramics, etc. It is suitable for repairing galvanised iron guttering and downpipes, and also for repairing walls, ceilings, floors, tiles, doors, locks, etc. Fixing bolts and other fixtures into concrete etc. It is suitable for repairs to furniture, sporting equipment, cars, caravans and boats (above the water line). Stopping countersunk heads of fastenings in any material. |
|
|
Technical Features
- Excellent adhesion to a variety of surfaces
- Sets hard in 20 minutes
- Can be sawn, drilled, tapped, sanded and painted
- Can be coloured with cement oxides or paint tinters (before adding hardener)
|
|
|
Application Tips
- SELLEYS PLASTI-BOND will not adhere to polyethylene, polypropylene or Teflon
|
|
|
|
Technical Details and Performance
Indicative information only, not to be used for setting specifications.
Appearance
Resin: Off-white (light grey) thick paste
Hardener: White paste
Working Time
5-8 minutes @ 25°C
Set Time
20 minutes @25°C
Service Temperature Limits
–28°C to +190°C
Lap Shear Tensile Adhesion Strength (on steel)
8000 kPa
Chemical Resistance
Resistant to fresh and salt water, acids, alkalis, oils
Shrinkage
Negligible |
|
|
|