Pro Trade Gap Filler Fast Skin

Pro-Trade Gap Filler Smooth Finish is a white, paintable, flexible acrylic gap sealant suitable for interior and exterior applications.

It is best for sealing gaps and joints where anticipated movement is not in excess of +/- 10% of joint width.

• Flexible – will withstand joint movement of +/- 10% of joint width. Suitable for those applications where slight movement causes hard fillers to crack and fall out
• Paintable with water and oil-based paints without need of priming*
• Weatherproof – suitable for interior and exterior applications
• Sag resistant – 0mm after 10mins Easy to apply
• Water clean up
• Low odour

*Some water-based undercoats and flat paints may crack on drying. Test on a small section of sealant. Paint cracking may be reduced by using vinyl/acrylic semi-gloss paint or oil- based undercoat first, or by allowing full cure.

Pro-Trade Expanding Foam is a triple expanding, non shrinking, multipurpose PU foam

• Expands to three times its original volume to quickly fill large holes, cracks and gaps
• Suitable for interior and exterior use (when painted)
• Will not shrink
• Reduces noise dust & draughts
• Excellent adhesion to form a durable and waterproof bond to most surfaces
• Once dry it can be painted, sanded, plastered, grouted, cut or caulked (approx. 3 hours)
• Patented all direction dispensing system
• Waterproof

Selleys Pro Trade Construction Adhesive Multipurpose is a high strength, multipurpose adhesive that forms a strong and lasting bond on most building substrates.

It's flexible enough to respond to normal shrinkage and thermal movement between building components without losing bond strength.

It can be used as the sole means of bonding (as a contact adhesive) or as a component in a dual bonding situation, i.e. in conjunction with mechanical fasteners, or where nails or screws are used to support the weight until full cure is completed.

It also exceeds requirements specified by Australian Standard AS 2329 (1999) “MASTIC ADHESIVE FOR FIXING WALLBOARDS”. (Including wet and poorly seasoned timber)

• High Strength
• Fast cure, but does not skin too quickly
• Water resistant
• Easily extrudable at low temperatures
• Does not drip, sag or string between panels
• Bridges gap up to 9mm hence can be used on rough and ill-fitting construction materials.
• Dried adhesive is paintable