Pro Trade Construction Adhesive Multipurpose

Pro Trade Construction Adhesive Multipurpose


Selleys Pro Trade Construction Adhesive Multipurpose is a high strength, multipurpose adhesive that forms a strong and lasting bond on most building substrates.

It's flexible enough to respond to normal shrinkage and thermal movement between building components without losing bond strength.

It can be used as the sole means of bonding (as a contact adhesive) or as a component in a dual bonding situation, i.e. in conjunction with mechanical fasteners, or where nails or screws are used to support the weight until full cure is completed.

It also exceeds requirements specified by Australian Standard AS 2329 (1999) “MASTIC ADHESIVE FOR FIXING WALLBOARDS”. (Including wet and poorly seasoned timber)

  • High Strength
  • Fast cure, but does not skin too quickly
  • Water resistant
  • Easily extrudable at low temperatures
  • Does not drip, sag or string between panels
  • Bridges gap up to 9mm hence can be used on rough and ill-fitting construction materials.
  • Dried adhesive is paintable


Suitable for the following applications:

  • Sheet flooring to joists
  • Metal or aluminium door strips to floors or walls
  • Timber or fibre cement sheeting to cement block or brick walls
  • Masonite / hardboard to timber or floor boards
  • Wallboard or panelling to wood or metal frames
  • Cork tiles to timber, fibre cement or plaster
  • Timber flooring to yellow tongue in conjunction with mechanical fixings to avoid later squeaking


Technology Solvent based synthetic rubber
Initial Bonding Strength > 500 kPa after 24 hours
Bond Strength in Tensile Shear >1 Mpa
Initial Cure 24 hours
Colour Beige

Related Products